Top 10 SCX10 2 Brass – Zubehör für Funktionsmodell-Bausätze

Als Amazon-Partner verdiene ich an qualifizierten Verkäufen.

1. XUNJIAJIE

XUNJIAJIE 4pcs Brass Steering Axle Balance Weight Block Counterweight for 1/10 RC Crawler Car Axial SCX10 II 90046 Upgrade Parts

XUNJIAJIE - Weight:80g/pc, 320g/4pcs. Durability, corrosion resistance, and great looks. Material: Messing. Part name:axle Balance Weight Block. Suitable for 1/10 rc crawler car axial SCX10-II 90046, Increase the weight of your car axle.
MarkeXUNJIAJIE
HerstellerXUNJIAJIE
Gewicht0.32 kg (0.71 Pfund)

2. GPM

GPM Axial SCX10 & SCX10 II Tuning Teile Brass Pendulum Wheel Knuckle Axle Weight with Alloy Lid + 21mm Hex Adapter, 1Pr Set Orange

GPM - Produktname : brass pendulum wheel knuckle Axle Weight With Alloy Lid + 21mm Hex Adapter - 1Pr Set. Accessories included : 21mm hex adapter-2pcs ; stainless steel pin 2x10-2pcs ; 5mm stainless steel Shims-2pcs ; 5mm Metal Washer-2pcs ; 20mm Stainless Steel Hex Socket Screws-2pcs ; Steel Washer-2pcs.

The high quality stainless steel is very suitable for muddy watery track with no fears of getting rusty. Für axial 1/10 scx10, sawback 4ls, scx10 ii ; gmade 1/10 sawback, komodo ; hpI 1/10 Venture. Weight per piece : 66-86 grams with 8 rolling beads, we recommend keeping at least 3 beads for better performance. To adjust the weight of the pendulum wheel, there are 8 removable stainless steel beads weighing 4g each. Install onto the front & rear outer case of the knuckles. Stainless steel rolling beads are designed to carry additional weight of 86 grams for each wheel keeping the weight downward towards the ground for better grabby performance.

This product is only suitable for wheels with 5mm thread hole and minimum 45mm inner diameter. 21mm widen hex adpater is included 16mm wider than original. The increased weight can stabilize the wheel and enlarge crawling angle especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly drive back to level.
MarkeGPM
HerstellerGPM
ArtikelnummerGPMSCX023AX-OR

3. GPM

1Pr Set, GPM Axial SCX10 & SCX10 II Tuning Teile Brass Pendulum Wheel Knuckle Axle Weight + 21mm Hex Adapter

GPM - Weight of single pendulum + Hex : 136 grams. Install on the outer drive portal to keep the gravity of the chassis stays heavy and low. Produktname : brass pendulum wheel Knuckle Axle Weight + 21mm Hex Adapter - 1Pr Set.

Accessories included : stainless steel pin 2x10-2pcs ; 5mm Spring Steel Shims-2pcs ; 5mm Metal Washer-2pcs ; 19mm Stainless Steel Hex Socket Screws-2pcs. Widen hex of 21mm included 16mm wider than the original. This product is only suitable for wheels with 5mm thread hole and minimum 45mm inner diameter. Für axial 1/10 scx10, scx10 ii ; gmade 1/10 sawback, sawback 4ls, komodo ; hpi 1/10 Venture FJ Cruiser.

The additional weight is kept downward so the crawler is more grabby to the ground and able to crawl in a larger angle. This part is designed with a bearing in the middle with a delrin collar, the weight pendulum is made narrower on the top and wider at the bottom to allow you to crawl in different angles.
MarkeGPM
HerstellerGPM
ArtikelnummerGPMSCX023X-OC

4. AXspeed

AXspeed 2 Stück Brass Achse Weight Portal Steering Knuckle Cap für 1/10 SCX10 AXI03007 Rc Car

AXspeed - Anzug für 1/10 rc axail scx10 iii axi03007 Raupenwagen. Material: Messing. Menge: 2 Stück. Erhöhen sie das Gleichgewicht und die Haltbarkeit. Gewicht: 100 g / Paar.
MarkeAXspeed
HerstellerAXspeed

5. GPM

Axial SCX10 & SCX10 II Tuning Teile Brass Pendulum Wheel Knuckle Axle Weight with Alloy Lid + 21mm Hex Adapter, 1Pr Set Green

GPM - The high quality stainless steel is very suitable for muddy watery track with no fears of getting rusty. Weight per piece : 66-86 grams with 8 rolling beads, we recommend keeping at least 3 beads for better performance. Produktname : brass pendulum wheel knuckle Axle Weight With Alloy Lid + 21mm Hex Adapter - 1Pr Set.

This product is only suitable for wheels with 5mm thread hole and minimum 45mm inner diameter. Für axial 1/10 scx10, sawback 4ls, scx10 ii ; gmade 1/10 sawback, komodo ; hpI 1/10 Venture. Stainless steel rolling beads are designed to carry additional weight of 86 grams for each wheel keeping the weight downward towards the ground for better grabby performance. The increased weight can stabilize the wheel and enlarge crawling angle especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly drive back to level.

Accessories included : 21mm hex adapter-2pcs ; stainless steel pin 2x10-2pcs ; 5mm stainless steel Shims-2pcs ; 5mm Metal Washer-2pcs ; 20mm Stainless Steel Hex Socket Screws-2pcs ; Steel Washer-2pcs. To adjust the weight of the pendulum wheel, there are 8 removable stainless steel beads weighing 4g each. Install onto the front & rear outer case of the knuckles. 21mm widen hex adpater is included 16mm wider than original.
MarkeGPM
HerstellerGPM
ArtikelnummerGPMSCX023AX-G

6. GPM

1Pr Set Grey Silver, Axial SCX10 & SCX10 II Tuning Teile Brass Pendulum Wheel Knuckle Axle Weight with Alloy Lid + 21mm Hex Adapter

GPM - Stainless steel rolling beads are designed to carry additional weight of 86 grams for each wheel keeping the weight downward towards the ground for better grabby performance. The increased weight can stabilize the wheel and enlarge crawling angle especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly drive back to level.

Für axial 1/10 scx10, scx10 ii ; gmade 1/10 sawback, sawback 4ls, komodo ; hpI 1/10 Venture. Install onto the front & rear outer case of the knuckles. To adjust the weight of the pendulum wheel, there are 8 removable stainless steel beads weighing 4g each. The high quality stainless steel is very suitable for muddy watery track with no fears of getting rusty. Accessories included : 21mm hex adapter-2pcs ; stainless steel pin 2x10-2pcs ; 5mm stainless steel Shims-2pcs ; 5mm Metal Washer-2pcs ; 20mm Stainless Steel Hex Socket Screws-2pcs ; Steel Washer-2pcs.

21mm widen hex adpater is included 16mm wider than original. Weight per piece : 66-86 grams with 8 rolling beads, we recommend keeping at least 3 beads for better performance. This product is only suitable for wheels with 5mm thread hole and minimum 45mm inner diameter. Produktname : brass pendulum wheel knuckle Axle Weight With Alloy Lid + 21mm Hex Adapter - 1Pr Set.
MarkeGPM
HerstellerGPM
ArtikelnummerGPMSCX023AX-GS

7. GPM

1Pr Set Red, GPM Axial SCX10 & SCX10 II Tuning Teile Brass Pendulum Wheel Knuckle Axle Weight with Alloy Lid + 21mm Hex Adapter

GPM - Install onto the front & rear outer case of the knuckles. 21mm widen hex adpater is included 16mm wider than original. Produktname : brass pendulum wheel knuckle Axle Weight With Alloy Lid + 21mm Hex Adapter - 1Pr Set. Für axial 1/10 scx10, scx10 ii ; gmade 1/10 sawback, sawback 4ls, komodo ; hpI 1/10 Venture.

The increased weight can stabilize the wheel and enlarge crawling angle especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly drive back to level. To adjust the weight of the pendulum wheel, there are 8 removable stainless steel beads weighing 4g each. The high quality stainless steel is very suitable for muddy watery track with no fears of getting rusty. Accessories included : 21mm hex adapter-2pcs ; stainless steel pin 2x10-2pcs ; 5mm stainless steel Shims-2pcs ; 5mm Metal Washer-2pcs ; 20mm Stainless Steel Hex Socket Screws-2pcs ; Steel Washer-2pcs.

This product is only suitable for wheels with 5mm thread hole and minimum 45mm inner diameter. Weight per piece : 66-86 grams with 8 rolling beads, we recommend keeping at least 3 beads for better performance. Stainless steel rolling beads are designed to carry additional weight of 86 grams for each wheel keeping the weight downward towards the ground for better grabby performance.
MarkeGPM
HerstellerGPM
ArtikelnummerGPMSCX023AX-R

8. GPM

GPM Axial SCX10 & SCX10 II Tuning Teile Brass Pendulum Wheel Knuckle Axle Weight with Alloy Lid + 21mm Hex Adapter, 1Pr Set Black

GPM - The increased weight can stabilize the wheel and enlarge crawling angle especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly drive back to level. To adjust the weight of the pendulum wheel, there are 8 removable stainless steel beads weighing 4g each.

The high quality stainless steel is very suitable for muddy watery track with no fears of getting rusty. Weight per piece : 66-86 grams with 8 rolling beads, we recommend keeping at least 3 beads for better performance. 21mm widen hex adpater is included 16mm wider than original. Stainless steel rolling beads are designed to carry additional weight of 86 grams for each wheel keeping the weight downward towards the ground for better grabby performance. Für axial 1/10 scx10, scx10 ii ; gmade 1/10 sawback, sawback 4ls, komodo ; hpI 1/10 Venture.

Accessories included : 21mm hex adapter-2pcs ; stainless steel pin 2x10-2pcs ; 5mm stainless steel Shims-2pcs ; 5mm Metal Washer-2pcs ; 20mm Stainless Steel Hex Socket Screws-2pcs ; Steel Washer-2pcs. This product is only suitable for wheels with 5mm thread hole and minimum 45mm inner diameter. Install onto the front & rear outer case of the knuckles. Produktname : brass pendulum wheel knuckle Axle Weight With Alloy Lid + 21mm Hex Adapter - 1Pr Set.
MarkeGPM
HerstellerGPM
ArtikelnummerGPMSCX023AX-BK

9. GPM

GPM Axial SCX10 & SCX10 II Tuning Teile Brass Pendulum Wheel Knuckle Axle Weight with Alloy Lid + 21mm Hex Adapter, 1Pr Set Blue

GPM - Für axial 1/10 scx10, scx10 ii ; gmade 1/10 sawback, sawback 4ls, komodo ; hpI 1/10 Venture. The high quality stainless steel is very suitable for muddy watery track with no fears of getting rusty. 21mm widen hex adpater is included 16mm wider than original. Weight per piece : 66-86 grams with 8 rolling beads, we recommend keeping at least 3 beads for better performance.

Install onto the front & rear outer case of the knuckles. This product is only suitable for wheels with 5mm thread hole and minimum 45mm inner diameter. Produktname : brass pendulum wheel knuckle Axle Weight With Alloy Lid + 21mm Hex Adapter - 1Pr Set. Stainless steel rolling beads are designed to carry additional weight of 86 grams for each wheel keeping the weight downward towards the ground for better grabby performance.

The increased weight can stabilize the wheel and enlarge crawling angle especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly drive back to level. To adjust the weight of the pendulum wheel, there are 8 removable stainless steel beads weighing 4g each. Accessories included : 21mm hex adapter-2pcs ; stainless steel pin 2x10-2pcs ; 5mm stainless steel Shims-2pcs ; 5mm Metal Washer-2pcs ; 20mm Stainless Steel Hex Socket Screws-2pcs ; Steel Washer-2pcs.
MarkeGPM
HerstellerGPM
ArtikelnummerGPMSCX023AX-B

10. INJORA

INJORA RC Balancegewicht 2pcs RC Counterweight RC Zubehör für 1:10 RC Crawler Traxxas TRX-4 8251

INJORA - Schönes aussehen, perfekte Leistung. Gilt für 1:10 rc crawler traxxas TRX-4 8251. Damit verändert man den Schwerpunkt und sorgt für das beste Gleichgewicht. Besteht aus hochwertigen Metall und langlebig. Lässt sich einfach und bequem zu installieren und entfernen.
MarkeINJORA
HerstellerINJORA
Artikelnummer7221